BGMYT - 744702 ENAMEL ALKYD LUST QD BLK 37038
- MSDS: BGMYT
- Manufacturer: PRATT AND LAMBERT
- Product Name: 744702 ENAMEL ALKYD LUST QD BLK 37038
- National Stock Number: 8010-01-124-7631
Product Identification
Product ID:744702 ENAMEL ALKYD LUST QD BLK 37038
MSDS Date:01/01/1985
FSC:8010
NIIN:01-124-7631
MSDS Number: BGMYT
Responsible Party
WICHITA, KS 67201
US
Cage: PRATT
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
ISOBUTYL ACETATE
RTECS: NP9100000
Fraction By Weight: <5%
ACGIH TLV: 150PPM
ISOBUTYL ALCOHOL (SARA III)
CAS: 78-83-1
RTECS: NP9625000
Fraction By Weight: 8%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
NAPHTHA ALIPHATIC (SHOW AS ALIPHATIC NAPHTHA BY MFG)
Fraction By Weight: 25%
ACGIH TLV: 200PPM
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 15%
OSHA PEL 100 PPM
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <5%
OSHA PEL 200 PPM; Z-2
ACGIH TLV: S, 50 PPM; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:INHAL:ANEST,IRRIT OF THE RESPIRATRY TRACT OR
ACUT NERV SYS DEPRESSION:HDACHE,DIZZ,STAGRNG GAIT,COMA.
First Aid
First Aid:SKN OR EYE CONTCT:PRIMARY IRRITATION:IN CASE OF CONTCT,FLUSH
SKN & EYES W/PLENTY OF WATER WHILE REMOVING CONTAM CLOTHING.IF
INHALED,REMOV TO FRESH AIR. CALL DR IF SYMPTOMS PERSIST.
Fire Fighting
Flash Point:13 F TCC -11 C T
Lower Limits:.90
Extinguishing Media:CO*2,DRY CHEM OR ALCOH FOAM,POLYMR FOAM PREFER F/LG
FIRES
Fire Fighting Procedures:SELF-CONTNED BREATHING APPARAT SHLD BE AVAIL
F/FIREMEN.
Unusual Fire/Explosion Hazard:KP CONTNRS TIGHTLY CLOS.ISOLAT FR
HEAT,ELECTR EQPMT,SPARK & OPN FLAME.CLOS CONTNRS MAY EXPLODWHN(SUP
Accidental Release
Spill Release Procedures:REMOV ALL SOURCES OF IGNITION (FLAMES,HOT
SURFACES,& ELECTRICAL, STATIC OR FRICTIONAL SPARKS).AVOID BREATHING
VAPORS.VENTILAT AREA.REMOV W/INERT ABSORBENT & NON-SPARKING TOOLS
Handling
Handling and Storage Precautions:DO NOT STORE ABOV 120 F.STOR LG
QUANTITIES IN BLDG DESIGNED TO COMPLY W/OSHA 1910.106.
Other Precautions:CONTNRS-GROUNDED WHN POURING.AVD FREE FALL OF LIQUID
IN EXCESS OF FEW INCH.DO NOT FLAM CUT,BRAZE OR WELD COATED MATRLW/O
BUR OF MINES APPRVD RESPIRAT OR APPROP VENT.AD LABEL WARN.DO NT TAK
INT
Exposure Controls
Respiratory Protection:MECH FILTR RESPIRAT TO REMOV SOLID AIR BORNE
PARTICL OF OVRSPRAY
Ventilation:PROVID GEN DILUT/LOC EXHAUST,VENTILAT IN VOL TO KP BELW TLV
Protective Gloves:F/PRLNG/REPEAT
Eye Protection:SAFETY EYEWR AGNST LIQUID
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO CONTAMINAT
CLOTHING.
Supplemental Safety and Health
UNUS. FIRE/EXPLOS HAZ:EXPOSED TO EXTREME HEAT. DO NOT APPLY TO VERY HOT
SURFACES.
Chemical Properties
Boiling Pt:B.P. Text:193-290 F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:66
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRES,HEAT & HOT SURFACES
Disposal
Waste Disposal Methods:IN ACCORDANCE W/LOC, STATE & FEDERAL
REGULATIONS.INCINERATE IN APPRVD FACILITY. DO NOT INCINERATE CLOSED
CONTNRS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.